|
Cone Tools 1" & UP I.D. |
|
Cone Cutter Tools |
|
These tools use the Powermaster
patented ergocentric cutters to clean hard scale from
typically larger tubes that are found in boilers. The
ergocentric cutters ensure that the same tooth does
not touch the same spot when cleaning and prevents
grooves being formed in the tube scale. All cone
cutter tools are fitted with universal joints to
negotiate bends in curved tubes
One Cone Tool: These consist
of of 1 Cone fitted onto a Universal Joint and are
used when scale build up is not severe.
Two Cone Tool: These consist of of 2 Cones
fitted onto a Universal Joint and are used when scale
build up is not severe. |
|
Straight Tube I.D. |
Curved Tube I.D. |
One Cone
Tool
Model
|
Two Cone
Tool
Model
|
Cone Diameter |
Spare Cone
Model
|
Spare
Universal
Joint
Model
|
|
inch |
mm |
inch |
mm |
inch |
mm |
| 1.1/16-1.5/16 |
27.0-33.3 |
1.3/16-1.7/16 |
30.2-36.5 |
OCT-1063 |
TCT-1063 |
15/16 |
23.8 |
SCT-937 |
UCT-1063 |
| 1.1/4-1.7/16 |
31.7-36.5 |
1.7/16-1.11/16 |
36.5-42.9 |
OCT-1250 |
TCT-1250 |
1.1/16 |
27.0 |
SCT-1062 |
UCT-1250 |
| 1.3/8-1.9/16 |
35.0-39.7 |
1.11/16-1.15/16 |
42.9-49.2 |
OCT-1375 |
TCT-1375 |
1.3/16 |
30.2 |
SCT-1187 |
UCT-1250 |
| 1.1/2-1.13/16 |
38.1-46.0 |
1.15/16-2.3/16 |
49.2-55.5 |
OCT-1500 |
TCT-1500 |
1.7/16 |
36.5 |
SCT-1437 |
UCT-1250 |
|
1.3/4-2.1/16 |
44.5-58.7 |
2.3/16-2.7/16 |
55.5-61.9 |
OCT-1750 |
TCT-1750 |
1.11/16 |
42.9 |
SCT-1687 |
UCT-1250 |
| 2-2.3/8 |
50.8-60.3 |
- |
- |
OCT-2000 |
TCT-2000 |
1.15/16 |
49.2 |
SCT-1937 |
UCT-1250 |
|
|
One Cone Tool
Two Cone Tool
Three Cone Tool |
|
Three Cone Tool: These
consist of 3 Cones fitted onto a base which is fitted
with a Universal Joint and are used for cleaning
larger (2.5/16" I.D. and up) tubes where scale build
up is severe. |
|
Straight Tube I.D. |
Curved Tube I.D. |
Three Cone
Tool Model
|
Spare
Cone Model
|
Spare
Base Model
|
Spare Universal
Joint Model
|
|
inch |
mm |
inch |
mm |
|
2.5/16-2.7/8 |
58.7-73.0 |
2.7/16-3.1/8 |
61.9-79.4 |
PCT-2313 |
SCT-937 |
CTB-2313 |
UCT-1250 |
|
2.13/16-3.3/8 |
71.4-85.7 |
3.1/16-3.11/16 |
77.8-93.7 |
PCT-2813 |
SCT-937 |
CTB-2813 |
UCT-1250 |
|
3.5/16-3.13/16 |
84.1-96.8 |
3.5/8-4.1/16 |
92.1-103.2 |
PCT-3313 |
SCT-1062 |
CTB-2813 |
UCT-1250 |
|
|
|
|
Scraper Tools |
Scraper Tool |
Scraping Blades |
Carbide Drill |
Universal Joint |
|
|
Scraper Tools use scrapper blades
that 'fly out' when the tool is rotated, coming into
contact with scale and scraping it out. These tools
can be coupled with brushes for simultaneous
'finishing' of the cleaning operation as with carbide
drills to initially drill through tubes that have very
hard deposits. |
|
Straight Tube I.D. |
Curved Tube I.D. |
Scraper Tool
Model
|
|
inch |
mm |
inch |
mm |
|
13/16-1.9/16 |
20.6-39.7 |
15/16-1.13/16 |
23.8-46.0 |
SCR-813 |
|
1.7/16-2.1/16 |
36.5-58.7 |
1.11/16-2.9/16 |
42.9-65.1 |
SCR-1438 |
|
1.11/16-3.1/16 |
42.9-77.8 |
2.7/16-3.1/16 |
61.9-77.8 |
SCR-1687 |
|
|
|
|
Spares for Scraper Tools |
- Model SCR-813-SB Spare Set of 3 Scraping
Blades for SCR-813
- Model SCR-1438-SB Spare Set of 3 Scraping
Blades for SCR-1438
- Model SCR-1687-SB Spare Set of 3 Scraping
Blades for SCR-1687
- Model CB-750 Carbide Drill for use with
SCR-1438 Scraper Tool to drill through tubes with
very hard deposits.
- Model CB-875 Carbide Drill for use with
SCR-1687 Scraper Tool to drill through tubes with
very hard deposits.
- Model UCT-1250 Universal Joint for use
with Scraper Tool for use with curved tubes.
|
|
|
|
Combination Cone - Carbide Drill Tool |
|
These combination tools use the
extreme hardness of a carbide drill coupled with the
ergocentric cleaning properties of cone cleaning
cutters to drill through and simultaneously clean
tubes that are choked with very hard deposits. |
|
Tube I.D. |
Combination Cone-Carbide
Drill Tool Model
|
 |
|
inch |
mm |
|
15/16-1.1/16 |
23.8-27.0 |
CCD-938 |
|
1.1/16-1.3/16 |
27.0-30.2 |
CCD-1063 |
|
1.3/16-1.7/16 |
30.2-36.5 |
CCD-1188 |
|
1.7/16-1.11/16 |
36.5-42.9 |
CCD-1438 |
|
1.11/16-1.15/16 |
42.9-49.2 |
CCD-1687 |
|
