|
Cleaning Tools 1" & UP I.D. |
|
Cylinder Cutter Tools |
|
These tools are used typically in
boilers and other larger tubes that have a light to
medium deposit. These tools use the Powermaster
patented ergonomic cutting wheels that ensure the same
tooth of the cutter wheel does not touch the same spot
when cleaning. This prevents grooves being formed in
the tube scale. The cutters 'fly out' when the tool is
rotated and perform cleaning action. |
|
Tube I.D. |
Cylinder Cutter
Tool Model |
Spare Cylinder
Cutter Model |
 |
|
inch |
mm |
|
1.7/16-1.7/8
|
36.5-47.6
|
CCT-1438
|
CYC-1438
|
|
1.13/16-2.7/8
|
46.0-73.0
|
CCT-1813
|
CYC-1438
|
|
2.3/16-3.3/16
|
55.5-81.0
|
CCT-2188
|
CYC-2188
|
|
3.1/8-3.7/8
|
79.4-98.4
|
CCT-3125
|
CYC-2188
|
|
|
|
|
Wing Tools - Stiff Arm Cutter |
|
 |
|
These tools use long stiff arms
with Powermaster patented cone cutters on their ends,
that spread out when rotated. These tools are used to
clean light to medium deposits in large diameter tubes
and pipes. |
|
Tube I.D. |
Wing Tool-Stiff Arm
Cutter Model |
Spare Cone
Cutter Model |
|
inch |
mm |
| 1.11/16-4 |
42.9-101.6 |
WTS-1688 |
SCT-937 |
| 3.15/16-6.1/2 |
100.0-165.1 |
WTS-3938 |
SCT-937 |
|
|
|
|
Wing Tool - Flexible Arm Cutter |
|
 |
|
These tools are similar in
operation to the Stiff Arm Winged Tools, but the
Powermaster patented Cone Cutters are attached onto
flexible arms. These tools are used in typically very
large vertical pipes and are used in cleaning pipes
from top to bottom. |
|
Tube I.D. |
Wing Tool-Flexible Arm
Cutter Model |
Spare Cone
Cutter Model |
|
inch |
mm |
| 3.15/16-12 |
100.0-309.0 |
WTF-3938 |
SCT-937
|
|
|
|
|
Wing Tools - Flexible Arm-Carbide Ball Tip |
|
 |
|
These tools are similar in
operation to the Flexible Arm Cutter Wing Tools except
these use carbide balls for removing light scale in
large diameter tubes and pipes. |
|
Tube I.D. |
Wing Tool-Flexible Arm
Carbide Ball Tip Model |
Number of
Balls Used |
|
inch |
mm |
| 15-16-2.1/16 |
23.8-52.4 |
WTC-938 |
4 |
| 1.15/16-4.1/16 |
49.2-103.2 |
WTC-1938 |
6 |
| 3.15/16-8.1/16 |
100.0-204.8 |
WTC-3938 |
6 |
|
|
|
|
Wing Tools - Flexible Nylon Rod |
|
These tools are fitted with
abrasive nylon rods that spread out when rotated.
These tools are used to clean light deposits in thin
tubes and pipes of exotic materials where damage to
tubes is to be avoided. |
|
Tube I.D. |
Wing Tool-Flexible Nylon
Rod Model |
 |
|
inch |
mm |
| 1.15/16-17 |
49.2-431.8 |
WTN-1938 |
|
