|
Sugar Mill Cutter Heads
|
|
'H' Type Cutter Heads - for Tubes/Pipes
1.1/4"-4" (31.7mm-101.6mm) I.D. |
 |
 |
 |
|
Single Layer 'H' Tool |
Two
Layer 'H' Tool |
Three Layer 'H' Tool |
|
|
These Cutter Heads are designed for
cleaning straight and curved tubes as found in
Boilers, Air Heaters, Economizers, etc. Cutter Heads
are provided with three cutter wheels, one each of
straight teeth, teeth cut right hand, teeth cut left
hand, for quicker cleaning and prevent grooving of
scale.
|
Model
No. |
Tube I.D. |
Head |
Cutter Wheels
Set of 3 Nos. |
|
inch |
mm |
Model |
Model |
|
H-10 |
1.1/4 |
31.7 |
HSRL-1 |
HA-1 |
|
H-11 |
1.3/8 |
35.0 |
HSRL-1 |
HA-1 |
|
H-12 |
1.1/2 |
38.1 |
HSRL-1 |
HA-1 |
|
H-13 |
1.5/8 |
41.3 |
HSRL-2 |
HA-2 |
|
H-14 |
1.3/4 |
44.5 |
HSRL-2 |
HA-2 |
|
H-15 |
1.7/8 |
47.6 |
HSRL-2 |
HA-2 |
|
H-16 |
2 |
51.0 |
HSRL-2 |
HA-2 |
|
H-17 |
2.1/8 |
54.0 |
HSRL-2 |
HA-2 |
|
H-18 |
2.1/4 |
57.1 |
HSRL-3 |
HA-3 |
|
H-20 |
2.1/2 |
63.5 |
HSRL-3 |
HA-3 |
|
H-22 |
2.3/4 |
70.0 |
HSRL-4 |
HA-3 |
|
H-24 |
3 |
76.2 |
HSRL-4 |
HA-3 |
|
H-26 |
3.1/4 |
82.5 |
HSRL-5 |
HA-3 |
|
H-28 |
3.1/2 |
88.9 |
HSRL-5 |
HA-3 |
|
H-30 |
3.3/4 |
95.2 |
HSRL-6 |
HA-4 |
|
H-32 |
4 |
101.6 |
HSRL-6 |
HA-4 |
| 'H' type Cutter
Heads also available in 2 or 3 Layers. |
|
|
|
|
'HZ' Type Cutter Heads - for Tubes/Pipes
1.1/4"-2" (31.7mm-51.0mm) I.D.
|
 |
 |
|
Close 'HZ' Tool (HZ-10 to HZ-11) |
Open 'HZ' Tool (HZ-11 to HZ-16) |
|
|
These spring loaded, self expanding
Cutter Heads are designed for rapid removal of hard
and obstinate scale formation in straight tubes as
found in Evaporators, Juice Heaters, etc. It consists
of three bevel 4 straight cutter wheels 4 left cutter
wheels and 4 right cutter wheels, fitted on three
bridge type arms. |
|
Model No. |
Tube I.D. |
Cutter Wheels
Set of 15 Nos. |
Spare Arms |
|
inch |
mm |
Model |
Model |
|
HZ-10 |
1.1/4 |
31.7 |
HZSRL-1 |
HZA-1 |
|
HZ-10A |
1.5/16 |
33.3 |
HZSRL-1 |
HZA-1 |
|
HZ-11 |
1.3/8 |
35.0 |
HZSRL-1 |
HZA-1 |
|
HZ-11A |
1.7/16 |
36.5 |
HZSRL-1 |
HZA-2 |
|
HZ-12 |
1.1/2 |
38.1 |
HZSRL-1 |
HZA-2 |
|
HZ-12A |
1.9/16 |
39.7 |
HZSRL-1 |
HZA-2 |
|
HZ-13 |
1.5/8 |
41.3 |
HZSRL-1 |
HZA-2 |
|
HZ-13A |
1.11/16 |
42.9 |
HZSRL-1 |
HZA-2 |
|
HZ-14 |
1.3/4 |
44.5 |
HZSRL-2 |
HZA-3 |
|
HZ-14A |
1.13/16 |
46.0 |
HZSRL-2 |
HZA-3 |
|
HZ-15 |
1.7/8 |
47.6 |
HZSRL-2 |
HZA-3 |
|
HZ-15A |
1.15/16 |
49.2 |
HZSRL-2 |
HZA-3 |
|
HZ-16 |
2 |
51.0 |
HZSRL-2 |
HZA-3 |
|
