The portable pneumatic tube
cleaners use hollow shafting of different diameters as
per tube I.D. to be cleaned which can be coupled
together to form lengths as per the length of the tube
to be cleaned.
Water flows through the hollow tube and washes out
deposits that are dislodged by the cleaning tools
attached to the driven shafts. Typical cleaning tools
used are carbide drills for severely clogged tubes,
brushes for light deposits and buffing tools for final
polishing of tubes. The water flow is independently
controlled allowing the user to determine how much
water is needed in the application.
Model C-10 is typically used on oil coolers, small
heat exchangers and condensers.
Model CP-315 is typically used on larger diameter
tubes of process vessels, heat exchangers and
condensers. |